# 11113 BeerGunTM Stainless Bottle Filler
BeerGun -Less install kit.
Check out install accessory kits below.
$69.99
Connection Kit includes:
This optional accessory kit provides everything you need to get your BeerGun up and running! A (beer in) liquid Ball-lock or Pin Lock disconnect with 1/4" nut & stem and stainless clamp (for the 10ft beer hose that comes with the BeerGun). The 5ft length of hose for your CO2 line complete with 1/4" stainless flare connectors to the brass 1/4" NPT X 1/4" flare adapter for connecting to the CO2 valve inlet on the BeerGun.
Also (not shown) CO2 line with 1/4" tee or 3/8" tee with clamps to connect to your Co2 line from the Co2 regulator. Simply splice in the BeerGun Co2 line to your existing Co2 line specify 1/4 " or 3/8" tee needed.
Questions; Please call we can help. 1-800-320-1456
#11114-1
Install kit
with Co2 Shut Off
Connection Kit includes: This optional accessory kit provides everything you need
to get your BeerGun up and running! A (beer in) liquid
Ball-lock or
Pin Lock disconnect with
1/4" nut & stem and stainless clamp (for the 10ft beer
hose that comes with the BeerGun). The 5-ft length
of hose for your CO2 line, complete with 1/4" shut
off, Brass Tee, 1/4" barb connectors to the brass
1/4" NPT x 1/4" flare adapter for connecting to the CO2
valve inlet on the BeerGun. Simply
remove existing shut off or outlet fitting from Co2 regulator.
Install the tee fitting with the New shut off into the regulator.
Screw your shut off into the new tee. Now your new BeerGun has a
separate Co2 line from your existing Co2 regulator with it's own
shut off.
(Kit
shown with Ball Lock Five gal. Fitting)