Cooler Box

Main Page

Kegging Page

The Beverage Equipment Company

Dispensing Cooler Box ( Jockey Box)

Last Up-Date 02-08

Dispensing Coolers with Stainless Steel Coils

*Rugged coil coolers include stainless steel coils, faucets with knobs, and box coupler assemblies. Does NOT include inlet tubing or keg fitting. See inlet tubing assemblies below.

Part No. Cooler Size - Faucets Coil Length Cost

16801-1 10 Qt       1      50' - 5/16" tubing $ 169.50

16801-2    10 Qt        1   70' - 5/16" tubing    182.00

16804-1 40 Qt* 1 50' - 3/8" tubing    193.00

16804-2 40 Qt* 1 125'    297.00

16806-1 40 Qt* 2 50' - 3/8" tubing    337.00

16806-2 40 Qt* 2 125'    556.00

16808-1
     80 Qt
2 125'    623.00

16808-2 80 Qt 3 125'    877.00

* May be on Wheeled cooler
    125' coils = 100' of 3/8" I.D. and 25' of 5/16" I.D. stainless steel tubing


* Out Side Jumper lines, Keg couplers, C0₂ cylinder, Co2 Regulators and Drain Tray sold separately. See complete Assemblies

    Coolers with 50' and 70' coils are recommended for low volume applications and
    operate best when the barrel can be kept below 55°F. Coolers with 125' coils are
    recommended for high volume applications or when the barrels will be kept above
    55°F. The serving temperature for coil boxes is approximately 40°F - 42°F. The
    cooler must be filled with ice and water. Coil coolers will not work with ice only.

Dispensing Coolers with Cold Plates

Rugged Cold Plate coolers include aluminum cold plate, faucets with knobs, shank assembly and internal lines to cold plate. See inlet tubing assemblies below.

Part No. Cooler Size - Faucets Coil Length Cost

16811-1      40 Qt 1 10" x 15" Plate    290.00

16811-2 40 Qt 2 10" x 15" Plate    342.00

16812-1
     80 Qt
2 12" x 18" Plate    583.00

* Out Side Jumper lines, Keg couplers, C0₂ cylinder, Co2 Regulators and Drain Tray        sold separately. See complete Assemblies

Aluminum cold plates

All cold plates are sold less fittings. Cold Plates are suggested for Wine and Soda use, for best sanitation.
* When using the #16829 cold plate a minimum of 5' of 3/16" beer tubing is required
between the outlet of the cold plate and the faucet to insure proper restriction.

8" x 12" Cold Plate
Part No.	Fits Cooler size	Faucets	Price
16821	40 Qt	1	$ 106.00
16822	40 Qt	2	112.00
10" x 15" Cold Plate
16826	40 Qt	1	144.00
16827	40 Qt	2	164.00
12" x 18" Cold Plate
16829	80 Qt	2	378.00

See Cold Plate Fittings

Build your Own Box

See Stainless Steel Fittings for more hose inlet fittings

Fitting to connect Stainless Steel Coils
# 16832	2-3/8" Inlet/outlet coupling assembly -requires #16841 for connection to S/S coil.	$ 16.28
# 16833	3" Inlet/Outlet coupling assembly -requires #16841 for connection to S/S coil.	17.67

# 16835

Faucet shank assembly -- 3-5/16" length-requires #16841 for connection to S/S coil.

$ 23.25

Faucet shank to connect Cold Plate
55212-1(‡)	3" Shank assy. 3/16" bore x 2-1/8" working length. Requires tubing and end fittings.	18.50
Faucets ( see more faucets )
55232	Chrome Faucet	17.50
55234	Brass faucet	17.50

‡ Please Add a suffix (3) for Chrome or (2) for Brass, Coupling Nut

wound stainless steel tubing

16841-1	Three piece coupling assembly for 1/4" tubing	5.20
16841-3	Three piece coupling assembly for 3/8" tubing	5.20
16841-5	Three piece coupling assembly for 5/16" tubing	5.20
Coupling Assy. includes Nut, Compression sleeve and washer.
16845	50' of wound 5/16" stainless steel tubing less fittings	92.45
16847	70' of wound 5/16" stainless steel tubing less fittings	116.00
16848	50' of wound 3/8" stainless steel tubing less fittings	97.00
16849	100' of 3/8" and 25' of 5/16" wound stainless steel tubing	$202.00

Jumper Line Assemblies

*Includes 2 ea. Hex Nut w/ Washer, per assembly

16851- 4	4 Ft. - Hex nut to Hex nut x 3/8" clear tubing - Cooler to Keg*	9.99
16851- 6	6 Ft. - Hex nut to Hex nut x 3/8" clear tubing - Cooler to Keg*	11.90
16852	5 Ft. - Hex nut to Hex nut x 3/16" clear tubing - Faucet Shank to keg fitting*	8.99
16853- 4	4 Ft. - Hex nut to 1/4 nut x 3/8" barb - 3/8" clear tubing - Cold plate to Keg fitting.	10.05
16853- 6	6 Ft. - Hex nut to 1/4 nut x 3/8" barb - 3/8" clear tubing - Cold plate inlet to Keg fitting	12.05
Complete Assemblies Co2 and Sankey
Box with Coils
16854	Co2 regulator with 4 foot gas line connected to the (1 ea.) Sankey keg fitting with 4 foot of beer tubing and Hex Nut end to box inlet. Fits One Faucet box.	109.00
16854-2	Co2 regulator with (2 ea.) 3 foot gas line teed to (2 ea.) Sankey keg fittings with (2 ea.) 4 foot of beer tubing and Hex Nut end to box inlet. Fits two Faucet box.	158.00
16854-3	Co2 regulator with (3 ea.) 3 foot gas line teed to (3 ea.) Sankey keg fittings with (3 ea.) 4 foot of beer tubing and Hex Nut end to box inlet. Fits Three Faucet box.	206.00
Box with Cold Plate
16855-1	Co2 regulator with 4 foot gas line connected to the Sankey keg fitting with 6 Ft. - Hex nut to 1/4 nut x 3/8" barb - 3/8" clear tubing - (Cold plate inlet to Keg fitting )	112.00
16855-2	Co2 regulator with (2 ea.) 3 foot gas line teed to (2 ea.) Sankey keg fittings with (2 ea.) 6 Ft. - Hex nut to 1/4 nut x 3/8" barb - 3/8" clear tubing - (Cold plate inlet to Keg fitting )	167.00
Assemblies can be made to order, at special lengths.

See Tubing for Co2 Gas Tubing

Cooler Box Drain

16894-2

Cooler Box Drain Tray -7" x7" x 2" held in place with cooler, w/under tray bracket.

36.00

Cold Plate Fittings - Stainless Steel

55374	1/4" flare nut x 3/8" hose barb	3.44
55370	1/4" flare nut	.40
55371	1/4" hose barb fits 55370	.60
55372	1/4" flare washer	.05
55375	1/4" flare nut w/ barb EL	3.10
55379	Male flare 1/4" flare x 1/4" hose barb	3.52
55379-2	Male flare (5/16" cold plate) x 1/4" hose barb	3.52

55370 - 55371- 55379

Co2 Tank - Unfilled

CO2-5

5 Lb. Aluminum Co2 tank 19" high x 5-1/4" Dia.

$ 106.50

A subsidiary of The Beverage Equipment Companies

Contacts | Webmaster | E-MAIL