| How do I get Started doing All grain and is their a kit? | ||
| Brewing and Mash Formulas | ||
Easy to assemble Mashing Tun Parts - |
||
No Float - Stainless Steel, Curved, Round & Perforated Great for the round style water cooler. (Gott, Rubbermaid, Igloo. etc.) |
||
Install the False Bottom
|
||
10809 |
9" Round Stainless Steel False Bottom w/ outlet Fitting (For 5 gallon Gott, Igloo, Rubbermaid.) | 32.90 |
| 10812 | 12" Round Stainless Steel False Bottom w/ outlet Fitting (For 10 gallon Gott, Igloo, Rubbermaid.) | 41.99 |
| 10814 | 14 " flat Stainless Steel fits into a converted 15 gallon keg | 80.00 |
|
Special false bottom Sizes also available -- Call |
||
Convert the valve |
||
10820 |
Valve Assembly -replaces push button water cooler valve. Assembly Includes (2) gaskets, shut off & 3/8" connecting tubing to false bottom. ( Uses 1/2" I.D. tubing on the outlet. not included) | $ 10.95 |
| Complete 5 Gallon Mash Tun Assembly | ||
| 10830 | 5 gallon cooler, Stainless Steel false bottom, with 1/2" Valve assy. and 3 foot out let tubing. Complete assembled |
$ 62.85 |
| 11248 | Stainless Steel Mash Paddle
4-3/4" paddle face x 36" hollow handle, Shown in front of a 10 gallon
cooler.
|
22.99 |
10840 |
Heavy Duty Propane Burner- Made to hold a 15-1/2 gal.
Converted Keg,
17-1/2" wide. with 3 ft. hose and adjustable regulator @ 54K BTU. - 170,000 BTU rated Burner  This is the
best propane burners we have
ever used. With 13 gallons of Wort it was sturdy as can be.
@ 18-Lb.s |
$76.80 Special Includes Stainless Steel 12" Thermometer ($12.50 value) |
|
||
| 10842 | Non Weld High Temp Gauge and Fitting. Stainless Steel with High temp. sealer gasket. Complete instructions for installation. All parts are FDA approved materials. Close up Picture | |
| 10842 | ||
10846 |
No Weld - 1/2" - All stainless steel ball valve, stainless steel 1/2" outlet barb nipple, Heavy Stainless Steel bulkhead washer and inlet. High temp. sealer gasket. Complete instructions for installation. All parts are FDA approved materials. | $ 56.99 |
10847 |
No Weld - 1/2" Brass valve Assembly - makes a used beer keg a instant brew kettle. Heavy inside stainless steel plate washer with High temperature gasket. and 1/2" brass barbed outlet. | $ 25.99 |
|
10848 |
Stainless Steel Washer 13/16" ID x 1-14/16" OD. | $ 1.65 |
|
10849 |
No Weld replacement Hi temp. Gasket |
$ 5.60 |
10850 |
304 Stainless Steel 1/2' union Female thread - used for thermometer - | 5.82 |
10850-1 |
304 Stainless Steel 1' union Female thread - used for thermometer - | 13.10 |
| 10850-2 | 304 Stainless Steel 1' x 3/4" union Female thread - used for thermometer - | 15.76 |
| 10851 | 304 Stainless Steel 'tee' 1/2"x1/2" x1/2" female thread | 10.52 |
10852 |
304 Stainless steel 6" nipple x 1/2" pipe thread. Weld nipple to a used beer keg for a drain valve | 16.00 |
| 10868 | 3"-High Temp 60-220 degrees stainless steel thermometer, w 3/4"pipe thread |
$ 35.00
|
| Grain Mills | ||
| 10870 | Victoria
Mill w/High Hopper --
Polished cast iron with a hand crank.
Can be clamped or bolted to a tabletop. Plate Style
|
$ 51.90 |
| 10871 | ||
| 10872 | ||
